|
Smooth Indiana Limestone is a solid, genuine natural Indiana Limestone sawn veneer. The strong, clean look of real limestone is ideal for commercial and fine residential structures.
Modular Units
- Made of the same naturally durable and high quality raw material used in our nation’s most renowned buildings.
- Use a proven, time-tested natural stone readily available in full-bed thickness precision cut modular units.
- Full color blend Smooth Sawn Indiana Limestone exhibits the subtle natural color range that has become the standard of Indiana Limestone over the last 150 years.
- Smooth Sawn Indiana Limestone is the perfect fit to brick and other building materials.
- Available in standard sizes of 4”, 8”, 12”, or 16” heights by 24” in length. Custom sizes available upon request.
Competitively Priced
- An historic natural stone competitively priced to engineered or cast stone imitations.
- Cost effective modular unit installation using traditional brick ties and having proper coverage/weight balance for efficient setting.
- Packaged ready-to-set and easily trimmed in the field for corner, door, and window openings.
Trim and Accent
- A full line of standard and custom transitional trim and accent units are available to match the full range of color of Smooth Sawn Indiana Limestone.
Product Description and Packaging
- Empire standard grade Full Color Blend material
- Smooth face with sawn top, bottom, back, and ends.
- Tolerances:
- Height (+/-) 1/16”
- Length (+/-) 1/16”
- Depth (+/-) 1/16”
- Palletized on 48” x 48” pallet, wrapped in plastic |
 |
The Benefits of Smooth Sawn Indiana Limestone Veneer:
Modular Units
- Limestone veneer made of the same high quality Indiana limestone material used in our nation’s most renowned buildings.
- Use a proven limestone veneer, a time-tested natural stone readily available in full-bed thickness precision cut modular units.
- Our Smooth Sawn Indiana Limestone veneer exhibits the subtle natural color range that’s become the standard of Indiana Limestone over the last 150 years.
- Smooth Sawn Indiana Limestone veneer is the perfect fit to brick and other building materials.
Competitively Priced
- Durable, natural stone competitively priced to “artificial”cast stone.
- Cost effective modular unit installation using traditional brick ties and proper coverage/weight balance for efficient setting.
- Smooth Sawn Indiana Limestone veneer is packaged ready-to-set and easily trimmed in the field.
Trim & Accent
- Full line of standard and custom transitional trim and accent units are available to match the full color range.
|
|
|
|
Smooth Sawn Indiana Limestone Veneer |
Smooth Sawn Indiana Limestone Veneer |
Smooth Sawn Indiana Limestone Veneer |
Smooth Sawn Indiana Limestone Veneer |
|
|
|
|
Smooth Sawn Indiana Limestone Veneer |
Smooth Sawn Indiana Limestone Veneer |
Smooth Sawn Indiana Limestone Veneer |
|
Delivery, Storage, and Handling
- Product will be supplied adequately packaged on pallets or timbers to keep finished stone clear of the ground.
- Storage area should be a well-drained space graveled or chipped for protection against mud splatters.
- When using pry bars to move stone into place, use padding to protect the edges of the stone.
Protection of Base Courses and Unfinished Work
- To avoid possible unsightly stains caused by mud or other splashing, the ground at the base of the structure should be covered with protective material during construction.This should be left intact until landscaping is complete.
- During construction, tops of walls should be carefully protected to prevent rain, snow, or seepage from entering space between veneer and backing.
Setting Mortar
- Setting mortar shall be ASTM C-270 Type N composed of one part Portland cement, one part mason’s lime, and six parts sand mixed with potable water, or one part masonry cement and two and three-fourths parts sand mixed with potable water.
Anchors
- Anchor Smooth Sawn Indiana Limestone veneer securely to sheathing, wood framing, or masonry backing. Use galvanized iron wall ties. These ties should be spaced approximately 24” vertically and 18” horizontally.
Cleaning
- After mortar has set, the wall should be brushed down with a stiff fiber brush, and then carefully rinsed with clear water to remove any accumulation of stain or matter foreign to the Limestone.
Damp proofing
- Where limestone is to be used at or below grade, damp proofing must be applied.
- Damp proofing the face of backup or structural concrete is helpful, but is not a substitute for back painting the stone.
- In cases where limestone is to be covered by soil or paving at grade, and where the stones will present an evaporation surface above grade, the damp proofing must be carried up the partially exposed face at least to grade level.
- KGO Stone recommends a cementation based waterproof coating such as Thoroseal.
Properties of Indiana Limestone
Most building designs that incorporate Indiana Limestone consider these properties:
- Ultimate compressive strength of dry specimens
Value: 4,000 psi min.* Test STD: ASTM C170
- Modulus of rupture of dry specimens
Value: 700 psi min.** Test STD: ASTM C99
- Absorption
Value: 7.5 % max. Test STD: ASTM C97
*Most Indiana Limestone products indicate min. values in excess of 4,000 psi, but this value is listed as an engineering reference.
**Windload and other bending forces are typically calculated at 1,000 psi for modulus of rapture.
NOTE: All Indiana Limestone meets or exceeds the strength requirements set forth in ASTM C-568 for Type II Dimension Limestone.
- Abrasion Resistance
When used in flooring, paving, or steps, the abrasion resistance should be specified.
- Value Range: (Abrasive Hardness)
6 min. to 17 max.† Test STD: ASTM C241
†Stone preparation and installation details are important in assuring hardness of 8 for heavy traffic areas. Specify abrasive hardness of 6 for light traffic areas such as patios, plazas and wide sidewalks.
|
|
